Fiber Optic Response Boxes

Current Designs' fiber optic handhelds are all plastic, working entirely on light. These response devices connect to the electronic interface using the removable fiber optic bundle. A complete system is made up of at least one handheld, the interface, removable fiber optic bundle, power supply and computer cables, but can include as many handhelds as needed.

	Four 0.43 in. colored round buttons Inline pattern 1 inch (2.5 cm) button spacing center to center Buttons can be placed in straight or curved line Rectangular enclosure 1.0 x 5.1 x 2.5 inches (2.5 x 13 x 6.4 cm) 10 foot long fiber pigtailed connector Compatible with both 4- and 8-channel bundles
Inline Model No: HH-1x4-L

	Four 0.43 in. colored round buttons in diamond pattern 0.8 inches (2 cm) button spacing center to center (green and blue buttons) 1.5 inches (4 cm) button spacing center to center (red and yellow buttons) Ergonomic enclosure 1.25 x 3.25 x 2.25/1.75 inches (2.8 x 9 x 5.8/4 cm) 10 foot long fiber pigtailed connector Compatible with both 4- and 8-channel bundles
Diamond Model No: HH-1x4-D

	Four 0.43 in. colored round buttons 0.8 inches (2 cm) button spacing center to center Ergonomic enclosure 1.25 x 3.25 x 2.25/1.75 inches (2.8 x 9 x 5.8/4 cm) 36 inch Y spacing between two boxes 8.5 foot long fiber pigtailed connector from Y (10 feet total) Compatible with both 4- and 8-channel bundles
Bimanual 4 Model No: HH-2x2

	Eight 0.43 in. colored round buttons in straight or curved line 1.0 (2.5 cm) button spacing center to center Two rectangular enclosures 1.0 x 5.1 x 2.5 inches (2.5 x 13 x 6.4 cm) Also available in ergonomic enclosures 36 inch Y spacing between two boxes 8.5 foot long fiber pigtailed connector from Y (10 feet total) Requires 8-channel (12 fiber) bundle Model: HH-2x4-C (curved pattern, shown)
Bimanual 8 Model No: HH-2x4-C

	Five 0.43 in. colored round buttons Button spacing 0.8 in(2 cm) center to center for fingers Stick: 1 inch (2.5 cm) diameter, 7 inches (17.8 cm) length 10 foot long fiber pigtailed connector Requires 8-channel (12 fiber) bundle Ergonomic button device with four finger buttons and one thumb button can be used with identical results by left- or right- handed persons
5 Button Stick Model No: HH-5-CYL

Two-axis continuous pointing device All plastic construction Works with the standard fORP interface Enumerates as a USB HID gamepad Acts as serial mouse under Windows XP High speed serial mode for demanding applications Angular range: 30 degrees (+/-15 degrees) Highly configurable: Finger actuator vs. Grip actuator (easily removeable grip) Foam inserts provide 3 different return-to-zero forces Dimensions: Overall height: 7.0 in (18 cm)Base enclosure: 7.25 x 4.25 x 2.25 in (19 x 11 x 6 cm) Buttons: Two 0.43 in. colored round buttons Finger stick: 1 x 0.35 in (2.4 x 0.8 cm) Grip 4.5 x 1.25 in (11.5 x 3 cm) 10 foot long fiber pigtailed connector Requires 8-channel (12 fiber) bundle

Joystick Model No: HH-JOY-4

	Two-axis shaft encoder cursor control Two side buttons All plastic construction Works with the standard fORP interface 10 foot long fiber pigtailed connector Enumerates as a USB HID gamepad Acts as serial mouse under Windows XP Overall dimensions: 4 in. x 5.75 in. x 1.75 in. (10 cm x 15 cm x 4 cm) Requires 8-channel (12 fiber) bundle
Trackball Model No: HH-TRK-1

Handheld bundle standard length is 10 feet. Complete system needs removable bundle (55 feet long) and interface. Single interface and bundle work with all handhelds.

Custom Handheld Devices Special handheld devices made up with up to 8 buttons, or 4 buttons and 2 continuous directional/force sensors. We've made a wide range of special response devices for around the same cost as our standard handhelds units.

USB Trainer Handheld Devices

We also offer USB Trainer versions for our button boxes. These are electrical copies of our fiber optic response pads, allowing subjects to be trained outside the magnet environment. Available with both 2 and 4 buttons, they can be combined for up to 8 buttons. Easy to use, USB bus-powered by the USB port -- so no extra wires. User configurable through the USB port. Also includes an input for the trigger, or for an optional Screen Detector.

Ordering Information