Description

FIU-005 Interface was the response system interface from 2003 to 2008 and works with all handhelds manufactured during this time. It is our legacy interface and replacements for existing systems can still be purchased. This interface should not be purchased with new equipment.

Note: it will not work will the HHSC handhelds manufactured in 2009 and following.

* 1 in. x 4.5 in. x 7 in. aluminum enclosure
* L.E.D.s: 4 indicators show response independently of PC/Mac
* 8 position program selector switch
* 9 TTL outputs (10-10 Modular Connector)
* USB (USB type B)
* RS-232 (8 pin mini-DIN)

Power supply
* 9V unregulated for 120 VAC countries (US, Canada, Japan)
* 9V unregulated for 240 VAC countries (EU, UK, Australia)

Triggering
* TTL input, 47k ohm pullup, positive edge triggered
* RS-232,TTL, or USB output
* RS-422 adapter also available

Front Panel (Electronic) Connections
BNC	TTL trigger input
Mini DIN8	Serial Port Ouput
USB Type B	USB outputs
10/10 Modular	TTL ouputs
Program Switch	Selects program (0 to 7)
2.5 mm power	9V unregulated supply (120 Vac mains)
alt	9V unregulated supply (220 Vac mains)

Rear Panel (Optical) Connections
Circular Optical Connector	(Bundle connection) Light signals to/from handheld units

fORP: Switch Positions and Programs

Our response devices are designed to work with all the software available today for stimulus presentation and response measuring. Please tell us if you think you are using a package that does not seem to be supported. Program choices are made by way of an eight position switch on the interface unit. Each interface option (USB, Serial, or TTL) has up to 8 different output formats, according to this table.

PROGRAM	SERIAL	USB	TTL
0	Standard (19.2k Baud)	Standard	Standard
1	E-Prime (19.2k Baud)	Mac	Inverted
2	Bitwise (57.6k Baud)	Non-Autorelease	*
3	Serial Trackball (1200 Baud)	Trackball	*
4	Superlab (19.2k Baud)	Numerical	*
5	Serial Mouse Protocal (1200 Baud)	Joystick	*
6	8 Button (19.2k Baud)	8 Button	8 Button
7	Special Outputs	Mac Powerlab w/5 Button	*

This device is not for use inside the magnet room: it contains metal and electronic components.

For more technical information see the FIU-005 Manual.