* 932 Electronic Interface
* Power supply and plug adapters
* Twelve-fiber removable bundle available in 3 lengths
* Response devices of your choice
* Standard USB (CB-USB-2) and optical flashing (CB-932-OUSB-1) cables
* Additional cables include serial, parallel, optical trigger and SMB trigger
For more information on each item go to the fORP components menu.
» Bright display for configuration - simplifies setup
» Automatic handheld device identification - speeds up setup
» Optical triggering - no need to have an optical-TTL converter
» Faster everything - better timing, improved responsiveness
» 32 channels with automatic gain adjustment and response device identification
» Internal programs (firmware) are locally upgradeable through the USB connection
» Aluminum enclosure 7 x 5.5 x 1 in. (17.8 x 14 x 2.5 cm)
» A bright OLED display guides the user through available mode choices
» Selections are retained and become active again on subsequent power-ups
» Button states and triggers are indicated with LEDs (for up to 10 buttons)
» The primary output for most users is the full speed USB output which simplifies interfacing to any hardware or program
» RS-232 serial and TTL parallel outputs are also available for special interfacing needs and for support of older programs and computers
» Only one response device can be connected at a time. For two-handed responses, order bimanual response devices. Most devices are automatically recognized and calibrated, which streamlines set up and changing configurations.
» Both optical and TTL triggers inputs eliminates need for an additional optical-to-TTL trigger converter box.